Adlink Express-IBE2 Manuale Utente Scaricare il pdf (Pagina 29)

Express-IBE2 Page 29

Signal Pin Description I/O PU/PD Comment

PCI_LOCK# C35 PCI Lock control line, active low. I/O 3.3V PU 8k2 3.3V

PCI_SERR# D33 System Error: SERR# may be pulsed active by any PCI device

that detects a system error condition.

I/O 3.3V PU 8k2 3.3V

PCI_PME# C15 PCI Power Management Event: PCI peripherals drive PME# to

wake system from low-power states S1–S5.

I 3.3VSB

PCI_CLKRUN# D48 Bidirectional pin used to support PCI clock run protocol for

mobile systems.

I/O 3.3V PU 10k 3.3V

PCI_IRQA# PCI_IRQB#

PCI_IRQC# PCI_IRQD#

C49

C50

D46

D47

PCI interrupt request lines I 3.3V PU 8k2 3.3V

PCI_CLK D50 PCI 33MHz clock output O 3.3V

PCI_M66EN D49 Module input signal indicates whether an off-Module PCI device

is capable of 66MHz operation. Pulled to GND by Carrier Board

device or by Slot Card if the devices are NOT capable of 66

MHz operation.

If the Module is not capable of supporting 66 MHz PCI

operation, this input may be a no-connect on the Module.

If the Module is capable of supporting 66 MHz PCI operation,

and if this input is held low by the Carrier Board, the Module PCI

interface shall operate at 33 MHz.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 82 83

Nessun commento

Adlink Express-IBE2 Manuale Utente Pagina 29