Adlink LEC-3517 Manuale Utente

Advance Technologies. Automate the World.LEC‐3517(Computer‐on‐Module)Technical ReferenceP/N50‐1Z152‐1000

6 OverviewP19 Not connected S20 Not connectedP20 Not connected S21 Not connectedP21 GBE_LINK100# (Ethernet Speed LED)S22 Not connectedP22 Not con

Overview 7LEC-3517P69 Not connected S70 GNDP70 Not connected S71 Not connectedP71 USB2_EN_OC# S72 Not connectedP72 Not connected S73 GNDP73 Not conn

8 OverviewP119 GPIO11 S120 LCD_DEP120 GND P121 LCD_VSP121 I2C_PM_CK S122 LCD_HSP122 I2C_PM_DAT S123 LCD_PCKP123 BOOT_SEL0# S124 GNDP124 BOOT_SEL1# S12

Overview 9LEC-3517Debug (JTAG1)Table 1-8 lists the pin signals of the JTAG1 header, which provides 10-pins, 2 rows, odd/evenpin sequence (1, 2) with

10 Overview

11LEC-3517Appendix A Technical Support ADLINK Technology, Inc. provides a number of methods for contacting Technical Support listedin Table A-1 bel

12Table A-1: Technical Support Contact Information (Continued)ADLINK Technology, Inc. (French Liaison Office) Address: 15 rue Emile Baudot, 91300

13LEC-3517Table A-1: Technical Support Contact Information (Continued)ADLINK Technology, Inc. (Israeli Liaison Office) Address: 6 Hasadna St., Kf

14

iiDisclaimerInformation in this document is provided in connection with ADLINK products. No license,express or implied, by estoppel or otherwise, to a

iiiLEC-3517Table of Contents1 Overview ...

iv

Overview 1LEC-35171 OverviewThis initial manual version presents a general overview of the LEC-3517 Computer-On-Module(COM). The next version of this

2 Overview1.2 Major Components (ICs)Table 1-1 lists the major integrated circuits on the LEC-3517, including a brief description ofeach IC. Figure 1-2

Overview 3LEC-35171.3 ConnectorsTable 1-2 describes the connectors shown in Figure 1-3. Figure 1-3: Connector Location (Top Side)1.4 SpecificationsPh

4 OverviewMechanical SpecificationsFigure 1-4: Mechanical Dimensions (Top Side)Power SpecificationsTable 1-4 provides the power requirements for this

Overview 5LEC-3517Environmental SpecificationsTable 1-5 provides the most efficient operating and storage condition ranges required for thismodule.