Adlink LEC-BTS Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware Adlink LEC-BTS. ADLINK LEC-BTS User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 22
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
Advance Technologies. Automate the World.
LECBTS
(ComputeronModule)
Technical Reference
P/N501Z1731000
Rev1.0
Vedere la pagina 0
1 2 3 4 5 6 ... 21 22

Sommario

Pagina 1 - Technical Reference

Advance Technologies. Automate the World.LEC‐BTS(Computer‐on‐Module)Technical ReferenceP/N50‐1Z173‐1000Rev1.0

Pagina 2 - 1.0 Initial Release Dec/14

6 Overview1.4.3 Power SpecificationsTable 1-4 provides the power requirements for this module.Operating configurations:  In-rush operating configurat

Pagina 3 - Table of Contents

Hardware 7LEC-BTS2 Hardware2.1 CPUThe LEC-BTS product family offers three versions of the Intel Atom E3800 Series CPU: theE3815 (Single Core), the E3

Pagina 4

8 Interfaces3.1 18/24 Bit LVDS LCD The LVDS interface is connected to the DDI0 interface of the SoC, while the translation is madeby a DisplayPort™-to

Pagina 5 - 1 Overview

Interfaces 9LEC-BTS3.10 SPIThe CPU implements an SPI controller, which supports two SPI Flash devices on the module forBIOS storage. 3.11 Serial (UAR

Pagina 6 - 1.2 Major Components (ICs)

10 Interfaces3.17 SMARC Interface SignalsTable 3-2 provides the pin signals for the SMARC P-S connector. Refer to the SMARC specifica-tion at http://w

Pagina 7 - Switch Default Setting

Interfaces 11LEC-BTSP43 Not connected S44 Not connectedP44 Not connected S45 Not connectedP45 Not connected S46 Not connectedP46 Not connected S47 GN

Pagina 8

12 InterfacesP93 HDMI_D2- S94 Not connectedP94 GND S95 Not connectedP95 HDMI_D1+ S96 Not connectedP96 HDMI_D1- S97 Not connectedP97 GND S98 Not connec

Pagina 9 - LEC_BTS_mech_dmn_a

Interfaces 13LEC-BTS3.18 Debug (DB40)Table 3-3 lists the pin signals of the CN1 connector, which provides 40 pins, 1 row, consecutivesequence with 0.

Pagina 10 - 1.4.3 Power Specifications

14 InterfacesNOTE: The gray table cells denote ground.25 LPC_AD126 LPC_AD227 LPC_AD328 LPC_FRAME#29 CLK33_LPC30 RST#31 BIOS_DIS032GND233 LPC_3V334 SPI

Pagina 11 - 3 Interfaces

15LEC-BTSAppendix A Technical Support ADLINK Technology, Inc. provides a number of methods for contacting Technical Support listedin Table A-1 belo

Pagina 12 - 8 Interfaces

iiDisclaimerInformation in this document is provided in connection with ADLINK products. No license,express or implied, by estoppel or otherwise, to a

Pagina 13

16Table A-1: Technical Support Contact Information (Continued)ADLINK Technology Beijing Address: ࣫ҀᏖ⍋⎔ऎϞഄϰ䏃 1 োⲜ߯ࡼ࡯໻ॺ E ᑻ 801 ᅸ(100085) Rm. 801, Pow

Pagina 14 - 3.17 SMARC Interface Signals

17LEC-BTSTable A-1: Technical Support Contact Information (Continued)ADLINK Technology, Inc. (Israeli Liaison Office) Address: 27 Maskit St., Cor

Pagina 16

iiiLEC-BTSTable of Contents1 Overview ...

Pagina 18

Overview 1LEC-BTS1 OverviewThis initial manual version presents a general overview of the LEC-BTS. After reviewing thisdocument you should understan

Pagina 19

2 Overview1.2 Major Components (ICs)Table 1-1 lists the major integrated circuits on the LEC-BTS, including a brief description of eachIC. Figures 1-2

Pagina 20

Overview 3LEC-BTSFigure 1-3: Component Locations (Bottom Side)1.3 Connectors, Switches, and LEDsTable 1-2 describes the connectors, switches, and LED

Pagina 21

4 OverviewFigure 1-4: Connector Locations (Top Side)SW4 Top 4-pin dip switch for loading BIOS setup defaults at Boot Up: 1 = 18bit [default] 4 = 24bit

Pagina 22

Overview 5LEC-BTS1.4 Specifications1.4.1 Physical SpecificationsTable 1-3 lists the physical dimensions of the module.1.4.2 Mechanical Specifications

Commenti su questo manuale

Nessun commento