Adlink IMT-1 Manuale Utente Scaricare il pdf (Pagina 19)

Getting Started 9

IMT-10T

2.3 Charging the Battery

Be sure to fully charge the battery before using your device for the

first time.

1. Locate the DC input socket on the left side of the tablet

and open the cover.

2. Insert the DC jack end of the AC adapter into the socket

and the AC plug into the wall socket.

3. The power status LED glows red when charging. If

charging for the first time, do not disconnect your device

from AC power until the battery is fully charged, indi-

cated by the power status LED glowing green. This may

take up to 4 hours.

4. Close the cover when charging is completed.

NOTE:

A blinking power status LED indicates an abnormal charging

condition. Check that the AC adapter is properly inserted into

the DC input socket and that the device is not charging in high

temperature conditions, resulting in an overheated battery.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Nessun commento

Adlink IMT-1 Manuale Utente Pagina 19